Skip to main content

Modifiche al passo #2

Modifica in base a Eric Gaulke-

Modifica approvata da Eric Gaulke

Eliminato
Aggiunto
Invariato

Righe Passo

[* blackred] Remove all 2.5mmPhillips 7.5mm, 12.5mm, and 10.5mm screws holding the circuit board to the case.
[* blackred] Remove all 2.5mmPhillips 7.5mm, 12.5mm, and 10.5mm screws holding the circuit board to the case.
[* icon_caution] Make sure the device has been powered off and disconnected from the power source for at least a day before touching the electronic components.