Salta al contenuto principale

Modifiche al passo #8

Modifica in base a Liz Matresse-

Modifica approvata da Liz Matresse

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Insertblack] Insert a new 250mm spoke into the hub and align ithub.
[* red] Align the spoke
with the spoke nipple in the rim.
[* red] Insertblack] Insert a new 250mm spoke into the hub and align ithub.
[* red] Align the spoke
with the spoke nipple in the rim.
[* icon_note] Try to keep the spoke as straight as possible when threading it around the other spokes. Slight bends will be taken out when it is tightened.