Skip to main content

Modifiche al passo #8

Modifica in base a Andrew Krasts-

Modifica approvata da Andrew Krasts

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Insert a new 250mm spoke into the hub and work around other spokes until it is aligned with the nipplenipple in the rim.
[* icon_note] Try and keep the spoke as straight as possible when threading it around the other spokes. Slight bends will be taken out when it is tightened
.
[* black] Insert a new 250mm spoke into the hub and work around other spokes until it is aligned with the nipplenipple in the rim.
[* icon_note] Try and keep the spoke as straight as possible when threading it around the other spokes. Slight bends will be taken out when it is tightened
.

Immagine 2

Nessuna immagine precedente

Aggiunto