Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Kristen Gismondi-

Modifica approvata da Kristen Gismondi

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] After removing the stereo face from the frame it should look similar to this.
[* red] Remove the seven 11.2mm Phillips #1 screws on the rear side of the stereo face. These seven screws are 11.2 mm long and require a Philips #1 screwdriver.
[* red] Remove the seven 11.2mm Phillips #1 screws on the rear side of the stereo face. These seven screws are 11.2 mm long and require a Philips #1 screwdriver.