Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Kristen Gismondi-

Modifica approvata da Kristen Gismondi

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Using the same screwdriver and PH1 bit, unscrewUnscrew the single 8.0 mm Phillips#1 screw holding the circuit board in place.
[* red] Using the same screwdriver and PH1 bit, unscrewUnscrew the single 8.0 mm Phillips#1 screw holding the circuit board in place.
[* black] Remove the circuit board from the joystick housing.