Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Faith Julian-

Modifica approvata da Faith Julian

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Using the screwdriversame screwdriver and P1 bit, remove the single 0.8 mm screw holding the circuit board in place.
[* red] Using the screwdriversame screwdriver and P1 bit, remove the single 0.8 mm screw holding the circuit board in place.
[* black] Remove the circuit board from the joystick housing.