Modifiche al passo #13
Modifica in base a Miroslav Djuric-
Modifica approvata da Miroslav Djuric
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* black] [* green] The LCD is easy to remove once the front panel is gone. [* green] The battery is not soldered to the logic board, making the replacement process a tad less difficult. [* red] Just like the iPad 2&3, the front panel is glued to the rest of the device, greatly increasing the chances of cracking the glass when trying to remove it. [* red] Gobs, gobs, and gobs of adhesive hold down everything in place, including the prone-to-start-a-fire-if-punctured battery. [* red] The LCD has foam sticky tape adhering it to the front panel, increasing chances of it being shattered during disassembly. [* red] You can't access the front panel's connector until you remove the LCD. |
| [* black] [* green] The LCD is easy to remove once the front panel is gone. [* green] The battery is not soldered to the logic board, making the replacement process a tad less difficult. [* red] Just like the iPad 2&3, the front panel is glued to the rest of the device, greatly increasing the chances of cracking the glass when trying to remove it. [* red] Gobs, gobs, and gobs of adhesive hold down everything in place, including the prone-to-start-a-fire-if-punctured battery. [* red] The LCD has foam sticky tape adhering it to the front panel, increasing chances of it being shattered during disassembly. [* red] You can't access the front panel's connector until you remove the LCD. |