Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Samantha Mickelson-

Modifica approvata da Samantha Mickelson

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Using the plastic spudger, place the curved side under the motherboard.
[* black] Gently pry the motherboard out of the base of the vacuum.
[* icon_caution] Do not use your fingers to take out the motherboard, as the bottom can be sharp.
[* icon_note] The motherboard will still be connected to the base with wires.