Salta al contenuto principale

Modifiche al passo #1

Modifica in base a David Albarran-Martinez-

Modifica approvata da David Albarran-Martinez

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Remove the three Phillips 2.8 mm2.8mm screws at the marked places with a JIS #000 screwdriver.
[* icon_note] The screw on the back of the ultrasonic sensor is covered by the foam.
[* red] Remove the three Phillips 2.8 mm2.8mm screws at the marked places with a JIS #000 screwdriver.
[* icon_note] The screw on the back of the ultrasonic sensor is covered by the foam.