Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Billy Pho-

Modifica approvata da Billy Pho

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Lift the MIC board over and lay it down against a surface.
[* black] Use a spudger to flip up the small flap on the ZIF connector.
[* black] Disconnect the ribbon cable from the MIC board.
[* black] Remove
board and pull the MIC boardboard away.
[* black] Disconnect the ribbon cable from the MIC board.
[* black] Remove
board and pull the MIC boardboard away.

Immagine 3

Nessuna immagine precedente.

Aggiunto