Modifiche al passo #3
Righe Passo
| + | [* icon_note] Each handle grip should now slide onto the T-tube with ease. If not, soak the handle grip(s) in warm water for another 1-3 minutes. |
|---|---|
| + | [* black] Holding the T-tube with one hand, slide a handle grip just completely onto the T-tube. The handlebar should barely stick out from the handle grip. |
| + | [* black] Repeat for the other handle grip if installing both. |
| + | [* black] Let the handle grips dry for 24 hours before use. |
Immagine 1
Nessuna immagine precedente.
Aggiunto
Immagine 2
Nessuna immagine precedente.
Aggiunto