Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Kristen Gismondi-

Modifica approvata da Kristen Gismondi

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Remove eighteen 10.19 mm10.2mm Phillips #1 screws from the perimeter of the back panel by turning the screwdriver counterclockwise.
[* orange] Remove one 11.91 mm11.9mm Phillips #1 screw from the center of the back panel.
[* yellow] Remove two 10.19mm10.2mm Phillips #1 screws from underneath hinged panels in the bottom right and left corners.
[* red] Remove eighteen 10.19 mm10.2mm Phillips #1 screws from the perimeter of the back panel by turning the screwdriver counterclockwise.
[* orange] Remove one 11.91 mm11.9mm Phillips #1 screw from the center of the back panel.
[* yellow] Remove two 10.19mm10.2mm Phillips #1 screws from underneath hinged panels in the bottom right and left corners.
[* icon_note] Our device does not include the cover panels for the USB, DVI-D, and power ports. You must first remove these cover panels shown in green in order to remove the back panel.