Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Helen Montell-Weiland-

Modifica approvata da Helen Montell-Weiland

Eliminato
Aggiunto
Invariato

Righe Passo

[* blackicon_note] Our device does not include the cover panels for the USB, DVI-D, and power ports. In order to remove the back panel you must first remove these cover panels.
[* red
] Remove eighteen 10.19 mm Phillips #1 screws from the perimeter of the back panel by turning the screwdriver counterclockwise.
[* blackicon_note] Our device does not include the cover panels for the USB, DVI-D, and power ports. In order to remove the back panel you must first remove these cover panels.
[* red
] Remove eighteen 10.19 mm Phillips #1 screws from the perimeter of the back panel by turning the screwdriver counterclockwise.
[* icon_note] Two of the screws along the perimeter will be underneath the panels in the bottom corners as shown in the third picture.
[* blackorange] Remove one 11.91 mm Phillips #01 screw from the center of the back panel.
[* blackorange] Remove one 11.91 mm Phillips #01 screw from the center of the back panel.