Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Helen Montell-Weiland-

Modifica approvata da Helen Montell-Weiland

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Remove eighteen 10.19 mm Phillips #1 screws from the perimeter of the back panel by turning the screwdriver counterclockwise.
[* icon_note] Two of the screws along the perimeter will be underneath the panels in the bottom corners as shown in the third picturepicture.
[* icon_note] Two of the screws along the perimeter will be underneath the panels in the bottom corners as shown in the third picturepicture.
[* black] Remove one 11.91 mm Phillips #01 screw from the center of the back panel.