Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Austin Culberson-

Modifica approvata da Austin Culberson

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Using your fingers or a probe, loosen the four small tabs located on the side of the faceplate sub-assembly by gently bending up the metal cover. (Two are shown in the picture while the other two are on the other side of the screen.)
[* orange] Using the spudge, loosen the metal cover by prying it away from the six small plastic tabs.
[*
black] Insert wisdom hereRemove the metal cover.
[* red] Using your fingers or a probe, loosen the four small tabs located on the side of the faceplate sub-assembly by gently bending up the metal cover. (Two are shown in the picture while the other two are on the other side of the screen.)
[* orange] Using the spudge, loosen the metal cover by prying it away from the six small plastic tabs.
[*
black] Insert wisdom hereRemove the metal cover.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione