Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #4

Modifica in base a Andrew Bookholt-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* icon_note] Re-orient your iMac so it sits upright on the stand.
[*
black] Insert wisdom herea plastic card up into the corner of the air vent slot near the top of the rear case.
[* black] Push the card toward the top of the iMac to release the front bezel latch.
[* black] Pull the front bezel away from the rear case.
[* icon_note] Repeat this process for the other side of the front bezel.
[* icon_note] It may be necessary to apply several layers of duct tape to the top of the access card to aid in releasing the latches.
[* black] If the bezel refuses to release, try pressing the lower edge back onto the rear case and repeat this opening process
.
[* icon_note] Re-orient your iMac so it sits upright on the stand.
[*
black] Insert wisdom herea plastic card up into the corner of the air vent slot near the top of the rear case.
[* black] Push the card toward the top of the iMac to release the front bezel latch.
[* black] Pull the front bezel away from the rear case.
[* icon_note] Repeat this process for the other side of the front bezel.
[* icon_note] It may be necessary to apply several layers of duct tape to the top of the access card to aid in releasing the latches.
[* black] If the bezel refuses to release, try pressing the lower edge back onto the rear case and repeat this opening process
.

Immagine 3

Nessuna immagine precedente.

Aggiunto