| - | [* black] Using your 1/2" combination wrench, remove the axle nuts from both sides of your skateboard trucks. |
|---|
| + | [* black] With the axel nut off you can now slide the wheel on and off. |
|---|
| + | [* black] To remove the bearings and bearing spacer from the wheel first slide the wheel so that it is half off the edge of the truck axel. |
|---|
| + | [* black] Then pry the bearing that is still on the axel by rotating the wheel about the end of the axel. The bearing should pop out and the bearing spacer that is loose inside will fall out after it. |
|---|
| + | [* black] Flip the wheel around and pry out the other bearing in the same manner. |
|---|