Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Matt Sanchez-

Modifica approvata da Evan Noronha

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] If the inside ofmicrowave continues to spark after the interior has been cleaned, that could indicate that the microwave is spotless, move on: -The diode may be broken. The diode can be found attachingis what attaches the capacitor to the back of the microwave. To test if it is broken, use the
[* red] A
multimeter and set itcan be used to measure resistancethe resistance of the diode. The multimeter must be on the resistance setting or the diode check setting. If the diode reads zero in both directionsdirections, then it is broken.
[* red] If the inside ofmicrowave continues to spark after the interior has been cleaned, that could indicate that the microwave is spotless, move on: -The diode may be broken. The diode can be found attachingis what attaches the capacitor to the back of the microwave. To test if it is broken, use the
[* red] A
multimeter and set itcan be used to measure resistancethe resistance of the diode. The multimeter must be on the resistance setting or the diode check setting. If the diode reads zero in both directionsdirections, then it is broken.