Modifiche al passo #5
Modifica di Victor Popov —
Modifica approvata da Victor Popov
- Prima di
- Dopo il
- Invariato
Righe Passo
| + | [* black] By hand you can now adjust the positioning of the stem and handlebar so that is in line with the front wheel of the bike. |
|---|---|
| + | [* black] Tighten the two bolts that clamp the stem to the steerer tube of the fork. |
| + | [* black] Make sure that after tightening bolt 2 you go back and make sure you check the tightness of bolt 1 again. Since the bolts are used to clamp, bolt 1 will usually not be tight enough after tightening bolt 2. |