Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Jeff Suovanen-

Modifica approvata da Jeff Suovanen

Prima di
Dopo il
Invariato

Righe Passo

+[* black] Insert a thin tool (such as one of your tweezer tips) under the red and black battery wires, and slide it underneath the battery connector.
+[* black] Gently pry straight up to disconnect the battery.
+[* icon_caution] Pry only from the side where the wires attach to the connector—if you pry anywhere else, you may break the socket.
+[* icon_reminder] During reassembly, align the connector in its socket and then press straight down to reconnect it, wiggling slightly as you press to help it seat correctly.

Immagine 1

Nessuna immagine precedente.

Aggiunto

Immagine 2

Nessuna immagine precedente.

Aggiunto