Salta al contenuto principale

Modifiche al passo #9

Modifica in base a Ron Davis-

Modifica approvata da Ron Davis

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Lay the board facedown on a smooth surface.
[* black] Lay the board facedown on a smooth surface.
[* icon_caution] Do not touch front of the dlp chip. Oils or dust will distort the tv image.
[* red] Use a small flathead screwdriver to turn the locking screw half a turn counterclockwisecounterclockwise.
[* orange] Remove DLP chip from the light engine board by pulling it straight back.
[* icon_note] PhotoThe photo shows an example of a broken DLP chip with hundreds of stuck pixels.
[* red] Use a small flathead screwdriver to turn the locking screw half a turn counterclockwisecounterclockwise.
[* orange] Remove DLP chip from the light engine board by pulling it straight back.
[* icon_note] PhotoThe photo shows an example of a broken DLP chip with hundreds of stuck pixels.