Salta al contenuto principale

Modifiche al passo #9

Modifica in base a David Sylvester-

Modifica approvata da David Sylvester

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Lay board facedown on a smooth surface.
[* [* icon_caution] Do not touch front of the dlp chip. Oils or dust will distort the tv image.
[* red] Use small flathead screwdriver to turn the locking screw half a turn counterclockwise
[* black] Remove DLP chip from the light engine board.
[* black] Photo shows brocken DLP chip with hundreds of stuck pixels.
[* [* icon_caution] Do not touch front of the dlp chip. Oils or dust will distort the tv image.
[* red] Use small flathead screwdriver to turn the locking screw half a turn counterclockwise
[* black] Remove DLP chip from the light engine board.
[* black] Photo shows brocken DLP chip with hundreds of stuck pixels.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Nessuna immagine precedente.

Aggiunto