Salta al contenuto principale

Modifiche al passo #8

Modifica in base a David Sylvester-

Modifica approvata da David Sylvester

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Carefully pull the board to expose the two cables that connect to the back of the board.
[* red] Use pliers and tweezers to disconnect the ribbon cable by pulling it straight out of its socket and the data connector from theby holding its tab and pulling it straight back offrom the board.
[* icon_noteicon_caution] Do not let the ribbon cable recede into the light engine.
[* red] Use pliers and tweezers to disconnect the ribbon cable by pulling it straight out of its socket and the data connector from theby holding its tab and pulling it straight back offrom the board.
[* icon_noteicon_caution] Do not let the ribbon cable recede into the light engine.