Salta al contenuto principale

Modifiche al passo #8

Modifica in base a David Sylvester-

Modifica approvata da David Sylvester

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Carefully pull the board to expose the two cables that connect to the back of the board.
[* blackred] Use pliers and tweezers to disconnect the ribbon cable and the powerdata connector from the back of the board.
[* blackred] Use pliers and tweezers to disconnect the ribbon cable and the powerdata connector from the back of the board.
[* icon_note] Do not let the ribbon cable recede into the light engine.

Immagine 1

Vecchia Versione

Nuova Versione