Salta al contenuto principale

Modifiche a questo Step

Modifica in base a Isaiah Abrea-

Modifica approvata da Isaiah Abrea

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Work the rubber cover off by slowly going all the way around applying as much force as needed.
[* icon_note]
Since the cover is glued, a heat gun at low temperature (oror a hair dryer)dryer may be useful to speed up the process, howeverprocess. However it is not required in this step.
[* black] Work the rubber cover off by slowly going all the way around applying as much force as needed.
[* icon_note]
Since the cover is glued, a heat gun at low temperature (oror a hair dryer)dryer may be useful to speed up the process, howeverprocess. However it is not required in this step.