Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #1

Modifica in base a nat coll-

Modifica approvata da nat coll

Prima di
Dopo il
Invariato

Righe Passo

[* black] While holding the microphone connector in one hand, and the XLR cable in the other hand, slowly pull them apart.
[* icon_note] Make sure you are not holding the microphone connector by the wires.
[* black] Check to make sure all of the internal wires are connected. If you see a disconnected wire, take a look at the connector[guide|11007|connector soldering guide. NEEDS A LINKguide.]
[* black] Check to make sure all of the internal wires are connected. If you see a disconnected wire, take a look at the connector[guide|11007|connector soldering guide. NEEDS A LINKguide.]