Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #1

Modifica in base a nat coll-

Modifica approvata da nat coll

Prima di
Dopo il
Invariato

Righe Passo

[* black] While holding the microphone connector in one hand, and the XLR cable in the other hand, slowly pull them apart. Make sure you are not holding the microphone connector by the wires. Check to make sure all of the internal wires are connected. If you see a disconnected wire, take a look at the connector soldering guide. Note: only two of the three pi