Salta al contenuto principale

Modifiche a questo Step

Modifica in base a Geoff Wacker-

Modifica approvata da Geoff Wacker


Righe Passo

[title] Detach the Battery from the Motherboard
[* red] Locate the foam pad pictured (on the left side of the battery when the carabiner is in the bottom right corner).
[* black] Gently lift up the foam pad
[* black] Insert the screwdriver or prying tool and apply minimal pressure to detach the cord connector from the motherboard
[* black] Repeat to detach power connector and volume connector. (under the other two foam pads)
[* icon_note] The battery connector comes out straight up, as does the connector at the top of the board. The connector across from the battery connector slides out sideways. All three are very small and delicate - be careful!