Modifiche a questo Step
|[* black] Place one hand on the LED board, holding it in place so that the bulb is inserted in the bulb hole and the screw thread on the LED board is aligned with the screw thread on the top plate.|
|[* black] '''Note:''' Located next to the screw thread on the top plate there is a plastic spike which goes through a hole next to the screw thread on the LED board. This plastic spike is meant to help hold the board in place.|
|[* black] Use your other hand and a J00 JIS head to screw the LED board back into its original position.|
Nessuna immagine precedente.