Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche a questo Step

Modifica in base a Matthew Lawler-

Modifica approvata da Matthew Lawler

Prima di
Dopo il
Invariato

Righe Passo

[* black] Gently place the motherboard and power board back onto the bottom plate, aligning with the respective screw threads. All screw locations are circled in the picture.
[* black] '''Note:''' On the tan power board there are two plastic spikes underneath which go through holes next to the screw threads. These spikes are meant to hold the board in place, so make sure each spike goes through its respective hole.

Immagine 1

Nessuna immagine precedente.

Aggiunto