Salta al contenuto principale

Modifiche al passo #2

Modifica in base a anonymous 6854-

Modifica rifiutata da Walter Galan

Eliminato
Aggiunto
Invariato

Righe Passo

[* icon_caution] As you may find yourself working with broken glass during this procedure, we recommend wearing [http://www.ifixit.com/Tools/Safety-Glasses/IF145-125|safety glasses|new_window=trueproduct|IF145-125|safety glasses] for protection from flying shards.
[* icon_caution] As you may find yourself working with broken glass during this procedure, we recommend wearing [http://www.ifixit.com/Tools/Safety-Glasses/IF145-125|safety glasses|new_window=trueproduct|IF145-125|safety glasses] for protection from flying shards.
[* icon_note] If you're removing a cracked screen, covering the glass in clear packing tape will hold it together while you work and minimize the mess.
[* black] Lay the iOpener flat on the right edge of the iPad, smoothing it out so that there is good contact between the surface of the iPad and the iOpener.
[* black] Let the bag sit on the iPad for approximately 90 seconds before attempting to open the front panel.
[* icon_note] The importance of warming the adhesive probably can't be overstated here. Warm adhesive is '''much''' easier to work with; cold adhesive (even cool) is much likeier to cause you problems.