Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #8

Modifica in base a Sam Goldheart-

Modifica approvata da Sam Goldheart

Prima di
Dopo il
Invariato

Righe Passo

[* black] While the bottom edge is being heated by the iOpener, begin releasing the adhesive from the right edge of the iPad.
[* black] Slide the guitaropening pick down along the edge of the iPad, releasing the adhesive as you go.
[* black] Slide the guitaropening pick down along the edge of the iPad, releasing the adhesive as you go.
[* icon_caution] The adhesive is very strong, and some serious force may be required. Work carefully.
[* icon_note] If you can see the tip of the guitaropening pick underneath the front glass, pull the guitar pick out just a little bit. While using the guitaropening pick this deep won't damage anything, it may get adhesive residue all over the LCD.
[* icon_note] If you can see the tip of the guitaropening pick underneath the front glass, pull the guitar pick out just a little bit. While using the guitaropening pick this deep won't damage anything, it may get adhesive residue all over the LCD.