Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #2

Modifica in base a Jeff Suovanen-

Modifica approvata da Jeff Suovanen


Righe Passo

[* black] Plug the charger into a surge-protected A/C outlet.
[* black] Wait until you hear the power connect chime (you should also see the battery charge symbol onscreen).
[* icon_note] You'll typically hear the chime in 10 seconds or less—unless your battery charge level is very low, in which case it may take up to 15 minutes.
[* black] Power on your MacBook by pressing the power button.
[* black] Once the MacBook successfully powers on, you can disconnect the 5 W charger, and use/charge your MacBook normally.
[* icon_note] If the MacBook fails to power on after 15 minutes, there may be an issue with your repair.

Immagine 1

Nessuna immagine precedente.