Modifiche al passo #4
Righe Passo
| + | [* black] Use the tip or the flat end of a nylon spudger to unlock the connector securing the flat cable of the keyboard to the logic board. |
|---|---|
| + | [* black] Pull the flat cable out not up. |
| + | [* black] When re-assembling, insert and hold the flat cable in place with one hand; use the other hand to lock the connecter using the tip or flat end of a nylon spudger. If you release the flat cable before locking the connector, it will most probably slip out. |
Immagine 1
Nessuna immagine precedente.
Aggiunto
Immagine 2
Nessuna immagine precedente.
Aggiunto