Salta al contenuto principale

Modifiche al passo #7

Modifica in base a Thomas Kennedy-

Modifica approvata da Thomas Kennedy

Prima di
Dopo il
Invariato

Righe Passo

+[* icon_caution] This step will require a soldering iron.
+[* red] Now you will have to remove the existing contacts by way of clipping the line of at an appropriate length away from the contacts.
+[* red] Now solder on your new connections on the board.
+[* blue] For the connections to the casing, you should be able to remove them with a little force. If you feel like you are using too much force, feel free to use a heat gun to eliminate some adhesive on the casing side of the contact.
+[* blue] Finally, adhere the new contacts to the casing with a "super glue" like Krazy glue.

Immagine 1

Nessuna immagine precedente.

Aggiunto

Immagine 2

Nessuna immagine precedente.

Aggiunto