Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Marty Rippens-

Modifica approvata da Marty Rippens

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Locate the screws that mount the wheel extension to the Robot.
[* red] Unscrew the four 11mm screws indicated with a Torx10 ScrewdriverTorx T10 screwdriver to remove the frame.
[* red] Unscrew the four 11mm screws indicated with a Torx10 ScrewdriverTorx T10 screwdriver to remove the frame.
[* icon_note] Make sure to remove the metallic weight. However, this does not require the removal of any screws.