Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #5

Modifica in base a Blake Klein-

Modifica approvata da Blake Klein

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Locate the Ribbon Cable.
[* black] Using Reverse Tweezers, tuck under
Use a pair of tweezers to flip the blue plastic piecetape 180 degrees.
[* black] Pullicon_note] By flipping the blue piece and pull outwards. Pulling outwards shouldtape you disconnect the ribbon from the circuit.
[* icon_caution] Must be gentle, but forceful enough. The ribbon can rip if too much force is used
display connector.
[* red] Locate the Ribbon Cable.
[* black] Using Reverse Tweezers, tuck under
Use a pair of tweezers to flip the blue plastic piecetape 180 degrees.
[* black] Pullicon_note] By flipping the blue piece and pull outwards. Pulling outwards shouldtape you disconnect the ribbon from the circuit.
[* icon_caution] Must be gentle, but forceful enough. The ribbon can rip if too much force is used
display connector.

Immagine 1

Vecchia Versione

Nuova Versione