Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Christopher Tran-

Modifica approvata da Christopher Tran

Eliminato
Aggiunto
Invariato

Righe Passo

[* blue] Remove the 2.5mm screw that secures the optical-drive connector board to the computer base.
[* black] Move wireless card wires covering the board away from the board.
[* light_blue]
Slide and liftthe optical-drive connector board away from the computer base.
[* red] Lift
the optical-drive connector board away from the computer base.
[* black] Move wireless card wires covering the board away from the board.
[* light_blue]
Slide and liftthe optical-drive connector board away from the computer base.
[* red] Lift
the optical-drive connector board away from the computer base.

Immagine 2

Nessuna immagine precedente.

Aggiunto

Immagine 3

Nessuna immagine precedente.

Aggiunto