Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Blake Klein-

Modifica approvata da Blake Klein

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] RotateFlip the computer so the keyboard is facing uprightlaptop over and open it up.
[* black] Wedge thea plastic opening tool between the keyboard and bottom case, pry upwards to separate the edges of the laptoptwo pieces.
[* black] Pop apartLift up the plastic tabs holding the keyboard and the bottom casings togetherkeyboard.
[* black] Removeicon_note] Ribbon cables still connect the whole keyboard once the edges are up.
[* icon_caution] When pulling the keyboard up, make sure to not disconnect the three pieces of tape connecting the keyboard to the bottom frame
two pieces.
[* black] RotateFlip the computer so the keyboard is facing uprightlaptop over and open it up.
[* black] Wedge thea plastic opening tool between the keyboard and bottom case, pry upwards to separate the edges of the laptoptwo pieces.
[* black] Pop apartLift up the plastic tabs holding the keyboard and the bottom casings togetherkeyboard.
[* black] Removeicon_note] Ribbon cables still connect the whole keyboard once the edges are up.
[* icon_caution] When pulling the keyboard up, make sure to not disconnect the three pieces of tape connecting the keyboard to the bottom frame
two pieces.