Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Keegan Lapham-

Modifica approvata da Keegan Lapham

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Rotate the computer so the keyboard is facing upright.
[* black] Wedge the spudger in between the keyboard and the edges of the laptop.
[* black] As you work aroundPop apart the seam betweenplastic tabs holding the keyboard and bottom casing, carefully pop apart each plastic tab that holds the two partsbottom casings together.
[* black] As you work aroundPop apart the seam betweenplastic tabs holding the keyboard and bottom casing, carefully pop apart each plastic tab that holds the two partsbottom casings together.
[* black] Remove the whole keyboard once the edges are up.
[* icon_caution] Be gentle whenWhen pulling the keyboard up. There areup, make sure to not disconnect the three pieces of tape connecting the keyboard to the bottom of the frame that you do not want to damageframe.
[* icon_caution] Be gentle whenWhen pulling the keyboard up. There areup, make sure to not disconnect the three pieces of tape connecting the keyboard to the bottom of the frame that you do not want to damageframe.