Salta al contenuto principale

Modifiche al passo #4

Modifica in base a Hetvi Mehta-

Modifica approvata da Hetvi Mehta

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] FlipRemove the two ribbons by first flipping back both black hinges open to remove the ribbons that are attached towhite clip, and detach the ribbon from the motherboard. It is easier to break them from the upper corner closest to the hinge.
[* black] To detach the second ribbon, flip back the black clip and remove the ribbon from the motherboard.
[* black] FlipRemove the two ribbons by first flipping back both black hinges open to remove the ribbons that are attached towhite clip, and detach the ribbon from the motherboard. It is easier to break them from the upper corner closest to the hinge.
[* black] To detach the second ribbon, flip back the black clip and remove the ribbon from the motherboard.
[* icon_caution] While doing this step be careful not to break the ribbons or move any of the other parts.

Immagine 1

Nessuna immagine precedente.

Aggiunto

Immagine 2

Nessuna immagine precedente.

Aggiunto

Immagine 3

Nessuna immagine precedente.

Aggiunto