Skip to main content

Modifiche al passo #2

Modifica in base a Vanessa Esteban Diego-

Modifica approvata da Vanessa Esteban Diego

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Remove the speaker and place downdown on a flat surface. The speaker will remain attached by two white wires.
[* red] Using the soldering iron heatiron, heat the soldersoldering points and liftcarefully pull the 2two wires outaway from the speaker to completely detach.
[* icon_caution] The soldering iron is very hot, so take caution not to touch it directly in order to avoid any burns to the body
.
[* black] Remove the speaker and place downdown on a flat surface. The speaker will remain attached by two white wires.
[* red] Using the soldering iron heatiron, heat the soldersoldering points and liftcarefully pull the 2two wires outaway from the speaker to completely detach.
[* icon_caution] The soldering iron is very hot, so take caution not to touch it directly in order to avoid any burns to the body
.