Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Vanessa Esteban Diego-

Modifica approvata da Vanessa Esteban Diego

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Locate the gray rubber contact in the middle of the bottom half of the device. Using the spudgerspudger, lift one corner of the contact until it pops looseloose.
[* black] Grab the contact and gently pull tilluntil the other side is freedetaches.
[* red] Locate the gray rubber contact in the middle of the bottom half of the device. Using the spudgerspudger, lift one corner of the contact until it pops looseloose.
[* black] Grab the contact and gently pull tilluntil the other side is freedetaches.
[* icon_note] When replacing the contact pad, use the narrow leads on the pad to pull it into place by twisting around the tips of the tweezers.