Salta al contenuto principale

Modifiche al passo #6

Modifica in base a Shane Riding-

Modifica approvata da Shane Riding

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Insert wisdom hereNotice the two connections attaching the back of the camera to the motherboard.
[* black] To disconnect the white wire, pinch the wire casing and pull directly out from the camera. It will take a very small amount of elbow grease. However, do not force or pry it.
[* black] To disconnect the ribbon connector, softly pull the back away from the motherboard. It should come undone with little force.
[* black] Once removed, set the back in a safe place
.
[* black] Insert wisdom hereNotice the two connections attaching the back of the camera to the motherboard.
[* black] To disconnect the white wire, pinch the wire casing and pull directly out from the camera. It will take a very small amount of elbow grease. However, do not force or pry it.
[* black] To disconnect the ribbon connector, softly pull the back away from the motherboard. It should come undone with little force.
[* black] Once removed, set the back in a safe place
.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Nessuna immagine precedente.

Aggiunto

Immagine 3

Nessuna immagine precedente.

Aggiunto