Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Adam O'Camb-

Modifica approvata da Adam O'Camb

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Locate the rubber grip on the left side of the camera. Using a metal spudger, pry the rubber grip off of the casing.
[* black] '''CAUTION''' beicon_caution] Be careful not to rip the rubber with the metal spudger.
[* blackred] Remove the five silver screws underneath the grip.
[*

[*
black] • 5.83mmOne 5.83mm silver x1 DL Flap • 5.85mm
[* black] Four 5.85mm
silver x4 underflapunder flap
[* black] '''CAUTION''' beicon_caution] Be careful not to rip the rubber with the metal spudger.
[* blackred] Remove the five silver screws underneath the grip.
[*

[*
black] • 5.83mmOne 5.83mm silver x1 DL Flap • 5.85mm
[* black] Four 5.85mm
silver x4 underflapunder flap