Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #2

Modifica in base a Sam Klink-

Modifica approvata da Sam Klink

Prima di
Dopo il
Invariato

Righe Passo

[* red] Loosen the four 1.5 mm screws on the heat sink using a #00 philips head screwdriver.
[* red] Loosen the four 1.5 mm screws on the heat sink using a #00 philips head screwdriver.
[* orange] Remove the tape holding the heatsink to the fan.
[* black] Remove the heatsink.
[* icon_note] When putting everything back together, use a new strip of electrical tape to make sure the parts are properly secured.