Salta al contenuto principale

Modifiche al passo #5

Modifica in base a Blake Klein-

Modifica approvata da Blake Klein

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Locatered] Remove the 3.5 mm Phillips3.5mm Phillip #0 screw that is attachingsecures the USB cable to the back plate of the device.
[* red] Unscrew the 3.5 mm Phillips screw using a Phillips PH0 screwdriver
panel.
[* black] Pull the USB cable off of the back plate.
[* black] Locatered] Remove the 3.5 mm Phillips3.5mm Phillip #0 screw that is attachingsecures the USB cable to the back plate of the device.
[* red] Unscrew the 3.5 mm Phillips screw using a Phillips PH0 screwdriver
panel.
[* black] Pull the USB cable off of the back plate.