Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Blake Klein-

Modifica approvata da Blake Klein

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Detach theInsert a spudger and pry at these three latches holding downlocations to detach the middle piece cover.
[* black] Use a spudger to pry open middle piece cover and pullPull off the middle piece cover to reveal three screws.
[* orange] Using theUse a T8 Torx screwdriver with the extension #4to remove the three 2.3 mm screws and take off2.3mm screws.
[* black] Remove
the middle piececover.
[* red] Detach theInsert a spudger and pry at these three latches holding downlocations to detach the middle piece cover.
[* black] Use a spudger to pry open middle piece cover and pullPull off the middle piece cover to reveal three screws.
[* orange] Using theUse a T8 Torx screwdriver with the extension #4to remove the three 2.3 mm screws and take off2.3mm screws.
[* black] Remove
the middle piececover.