Salta al contenuto principale

Modifiche al passo #2

Modifica in base a lauren paganella-

Modifica approvata da lauren paganella

Eliminato
Aggiunto
Invariato

Righe Passo

[* green] Detach the three latches holding down the middle piece cover.
[* black] Use a spudger to pry open middle piece of controllercover and pull off middle piece cover to reveal three screws.
[* black] Use a spudger to pry open middle piece of controllercover and pull off middle piece cover to reveal three screws.
[* red] Using the T8 Torx screwdriver with the extension #4 remove the three 2.3 mm screws and take off the middle piece.