Salta al contenuto principale

Modifiche al passo #2

Modifica in base a lauren paganella-

Modifica approvata da lauren paganella

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Detach the 3 latches holding down the middle piece cover.
[* black] Use a spudger to pry open middle piece of controller and pull off middle piece to reveal three screws.
[* red] Using the T-8T8 Torx screwdriver with the extension #4 remove the 2.3 mm screws and take off the middle piece.
[* red] Using the T-8T8 Torx screwdriver with the extension #4 remove the 2.3 mm screws and take off the middle piece.